howto build a linux wireless access point

From thelinuxwiki
Revision as of 21:56, 27 February 2013 by Nighthawk (Talk | contribs)

(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to: navigation, search


hostapd

gentoo post hostapd install instructions 

* In order to use hostapd you need to set up your wireless card
* for master mode in /etc/conf.d/net and then start
* /etc/init.d/hostapd.
* 
* Example configuration:
* 
* config_wlan0=( "192.168.1.1/24" )
* channel_wlan0="6"
* essid_wlan0="test"
* mode_wlan0="master"
* 
* You have enabled Wi-Fi Protected Setup support, please
* read the README-WPS file in /usr/share/doc/hostapd-1.0
* for info on how to use WPS


resources 

http://en.gentoo-wiki.com/wiki/Wireless/Access_point

gentoo user manual on wireless networking 

http://www.gentoo.org/doc/en/handbook/handbook-x86.xml?part=4&chap=4

http://wiki.gentoo.org/wiki/Wpa_supplicant

example config 

http://my.opera.com/CrazyTerabyte/blog/2009/10/23/wi-fi-with-master-mode-finally
Retrieved from "http://www.thelinuxwiki.com/index.php?title=howto_build_a_linux_wireless_access_point&oldid=120"