Difference between revisions of "Iptables quick guide"
From thelinuxwiki
(→NAT) |
(→allow muliple ports example) |
||
| Line 10: | Line 10: | ||
== allow muliple ports example == | == allow muliple ports example == | ||
| − | iptables - | + | list of ports |
| + | iptables -A tableName -p tcp --match multiport --dports port1,port2,port3 -j ACCEPT | ||
| + | example | ||
| + | iptables -A INPUT -p tcp --match multiport --dports 22,80,443 -j ACCEPT | ||
| + | port range | ||
| + | iptables -A tableName -p tcp --dports start_port:end_port -j ACCEPT | ||
| + | example | ||
| + | iptables -I OUTPUT -p tcp -d 1.1.1.1 --dport '''1024:65535''' -j ACCEPT | ||
== IP range example == | == IP range example == | ||
Revision as of 21:19, 20 February 2014
http://www.linode.com/wiki/index.php/Netfilter_IPTables_Mini_Howto
Contents |
Changing the default policy in iptables
iptables -P INPUT DROP
allow outbound rsync and insert rule at the top of the chain
iptables -I OUTPUT -p tcp -d 1.1.1.1 --dport 873 -j ACCEPT
allow muliple ports example
list of ports
iptables -A tableName -p tcp --match multiport --dports port1,port2,port3 -j ACCEPT
example
iptables -A INPUT -p tcp --match multiport --dports 22,80,443 -j ACCEPT
port range
iptables -A tableName -p tcp --dports start_port:end_port -j ACCEPT
example
iptables -I OUTPUT -p tcp -d 1.1.1.1 --dport 1024:65535 -j ACCEPT
IP range example
iptables -A INPUT -p tcp --dport 22 -m iprange --src-range 192.168.1.100-192.168.1.200 -j ACCEPT
NAT
show nat rules
iptables -L -t nat
hide nat behind and interface
iptables -t nat -A POSTROUTING -o tun0 -s 192.168.1.0/24 -j MASQUERADE
destination NAT
iptables -t nat -A PREROUTING -d 1.1.1.10 -j DNAT --to-destination 192.168.1.228
saving rules for reload on reboot
on fedora 17
iptables-save > /etc/sysconfig/iptables
