AT&T DSL ATM information for cisco DSL router setup

From thelinuxwiki
Revision as of 20:57, 12 May 2013 by Nighthawk (Talk | contribs)

(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to: navigation, search

The following information was taken from a working motorola modem on AT&T home DSL in the Dallas / Fort Worth area. The items in bold were used to configure a ciso 837 integrated services router successfully to replace the motorola.

ADSL Line State:        Up
ADSL Startup Attempts:  6
ADSL Modulation:        DMT 
ADSL Data Path:         Fast
Datapump Version:       DSP 7.5.2.202, HAL 7.5.2.1
Downstream Upstream ---------- ---------- SNR Margin: 12.00 12.00 dB Line Attenuation: 39.00 23.00 dB Output Power: 0.00 11.88 dBm Errored Seconds: 0 0 Loss of Signal: 0 11016 Loss of Frame: 0 0 CRC Errors: 39121 60 Data Rate: 4928 768
ATM port status  : Up Rx data rate (bps) : 4928 Tx data rate (bps) : 768
ATM Virtual Circuits:
VCC # Type VPI VCI Encapsulation ----- ---- --- ----- -------------------------- 1 PVC 0 35 PPP over Ethernet (LLC/SNAP encapsulation)
ATM Circuit Statistics: VCC-1
Rx Frames  : 431645 Tx Frames  : 362900 Rx Octets  : 340983553 Tx Octets  : 103278984 Rx Errors  : 0 Tx Errors  : 0 Rx Discards  : 0 Tx Discards  : 1573